Generator:

• Type- Constant Potential HV, Input Line- 120 - 230 VAC

X-Ray Tube:

• Metal Ceramic, Water-cooled, Tungsten Target, End grounded
• Rating= 120kV/10mA, 40kV/30mA, 1200 watts continuous dissipation
• Focal Spot Size= 1mm x 1mm

Base Unit Assembly:

• Basic Space Requirements: 29” x 30”
• Vertical Travel: up to 68”
• Horizontal Arm Travel: 17” to 61” from center
• X-Ray Tube Movement: V&H 180 degrees
• Integrated Modular Components: Input power, HV generator, Heat exchanger

Operator Control Console:

• Can be located up to 100’ (30 meters) from base unit
• Service mode for system set-up and calibration - key entry

Two Treatment Techniques:

• 100kV @ 8mA, 2.1mm Al. HVL or 70kV @ 10mA, 1.3mm Al. HVL
• X-Ray output is 460 cGy @ 15cm SSD

Automatic Filter Change (Patent Pending):

• 2.1mm Al. HVL / 1.3 mm Al. HVL / Pb X-Ray Block

Automatic Warm-up Procedures:

• Automatically activated from the time of last exposure
• Four pre-programmed sequences
• Lead blocker automatically placed over x-ray tube support

RAD Check:

• Direct radiation measurement of output and pre-treatment verification

System Weight:

• 350 lbs

Accessories:

• The SRT 100 includes all the various sized Applicators ranging from 1.5cm to 10.0cm, an Applicator Replacement TIP Kit, a Service Spare Fuse/Hardware Kit, a Cable Retractor Installation Kit and a set of Physicist Calibration Fixtures.

Replaceable Safety Contact Shields:

• Applicator size specific. Visibility of treated area.

Maximum Field Size:

• 10 cm.

Maximum Energy:

• 100 kV